Images are representations only.
GeniSys® 7590 24V Gas Burner Control
Price
Request a Quote
Stock
In Stock
Does not ship to OH, United States
- Lockout Time: 4 seconds
- 120 Volt Igniter and Blower Motor Output: Yes
- 24 Volt Gas Valve Output: Yes
- 2 Pin Connector for Pressure Switch: Yes
- Non-Volatile Lockout: No
Specifications
Brand
Input Voltage
- 120 V, 50/60 Hz (igniter, motor)
- 24 V (18-30 VAC) 50/60 Hz (gas valve and air proving switch)
Current Draw - Run
- 0.2 Amps (Control Only)
Output
- Main Valve Rating: 2.0 amps
- Motor Relay Rating: 7.4 amps (120 V)
- Igniter Relay Rating: 1.0 amp (120 V)
Approvals
- UL listing per ANSI Z21.20, UL372 and CSA C22.2 No. 199
Timings
- Ignition Timing: 4-15 seconds
- Pre-purge Timing: 1-240 seconds
- Inter-purge Timing: 90-300 seconds
Additional Ratings
- Minimum Flame Current Required: 1.0 µA
- Flame Failure Response Time: 0.8 seconds (maximum)
- Thermostat Voltage: 24 Vac (if used)
- Heat Anticipator Setting: 0.2 amps + gas valve current draw (control is not polarity sensitive)
Environmental Ratings
- Storage & Operating Ambient Temperature: -40°F to +175°F (-40°C to +79.4°C)
- Moisture: 5 to 95% RH, non-condensing
