Images are representations only.
S8910U3000/U Universal Hot Surface Ignition Module
Part Number: S8910U3000/U Brand: Resideo Technologies IncUniversal Hot Surface Ignition Module
Price
Request a Quote
Stock
In Stock
Does not ship to OH, United States
Universal hot surface ignition module replaces multiple field installed hot surface ignition modules supplied by Resideo, White-Rodgers, Robertshaw and Johnson.
Uses a 120 VAC igniter. Includes cross reference, instructions, and accessories for easy replacement.
Features- Replaces Over 800 White-Rodgers, Robertshaw and Resideo Hot Surface Ignition Models.
- For 120 Vac - Up to 5.0A Surface Igniter: Norton 201/271 or Equivalent.
- S8910U 3000 Series Has Led Status Indicator and Microammeter Ports for Easy Trouble Shooting
- For Local - Single Rod or Remote - Dual Rod Rectification Type Flame Sensing.
- Contains Easy-to-Use Cross Reference and Instructions Plus the Accessories Required to Replace the Existing Hot Surface Ignition Module.
- Provides One or Three Ignition Trials; Four-second or Seven-second Trials per Call for Heat.
- Field Selectable Number of Ignition Trials and Trial Time Based on Unit Being Replaced.
- Igniter Warm Up Time: 7; 12 Seconds Second and Third Trial, 17; 27 Seconds Second and Third Trial, 34, or 45 Seconds
Specifications
Dimensions
- 5-1/4 in. high x 4-1/16 in. wide x 1-15/16 in. deep
- 133 mm high x 103 mm wide x 49 mm deep
Electrical Ratings
- 24 Vac
Frequency
- 50 Hz; 60 Hz
Approvals, Canadian Standards Association
- Design Certified
Tradeline Value
- Tradeline
Flame Failure Response Time
- 1.5 sec.
PrePurge
- 32 seconds
Ambient Temperature Range
- -40 °C to +79 °C
- -40 °F to +175 °F
Ignition System Type
- Direct Hot Surface Ignition
Ignition Sequence
- The number of trials for ignition and trial time is determined by the dip switch selection.
Typical Gas Control
- VR8205
- VR8305
Type of Gas
- Natural or LP
Flame Sense
- Single Rod or Two Rods
Ignition Source
- Line Voltage (120 VAC) Hot Surface Element (Norton Model 201 or 270)
Ignition Trials To Lockout
- 1 or 3
Lockout Timing
- 4 sec. or 7 sec.
Ignition Trial Time
- 4 sec. or 7 sec.
Maximum Valve Load at 24 Vac
- 2A
Typical Ignition Hardware
- Norton 201
- Norton 271
- Q354
Between Trial Time
- (2) 96 sec (32 Seconds Prepurge and 64 seconds interpurge)
